ATOMIUM APROHIM™ "SDA" mild fuel additive is designed to restore and maintain the performance of diesel fuel systems, including common rail and pump-injector systems. The additive cleans (washes), lubricates, protects nozzles and fuel pumps from corrosion, maintaining their serviceability. Brings the cetane number of fuel to optimal values.
Effects of application
Diesel fuel systems are particularly sensitive to fuel quality and the condition of the fuel equipment. Contamination and wear due to "dry" fuel reduces the pressure in the fuel rail, interfere with injection, which leads to a drop in power and uneven engine operation.
The SDA fuel additive contains detergent and lubricant components, a corrosion inhibitor and a cetane additive. It cleans the fuel equipment, reduces its wear, and provides the necessary pressure. Together, this provides high-quality fuel atomization and more complete combustion, which leads to the following effects:
- reduction of fuel consumption by 5%-15% depending on the condition of the car.
- easier starting of the engine.
- extending the service life of fuel equipment, in particular injectors.
- reducing the load on the turbine, particulate filters, which extends their life.
- reduction of contaminants in engine oil, which maintains its performance properties and ultimately reduces engine wear.
The additive SDA is designed for constant use, therefore it has a balanced "soft" formulation. It gradually removes dirt and deposits and prevents the formation of new ones. The additive does not contain "combustion promoters" or other substances that change the operating modes of the engine. The additive is compatible with any type of "anti-gel" that prevents the crystallization of diesel fuel in the cold.
The additive is sold in disposable bottles - in most cases, one bottle with each refueling of a full tank.
1 bottle 50 ml is designed for 40-60 litres of fuel (approximately 1 ml per 1 litre of fuel). Before refuelling the car, fill the additive in the fuel tank.
Application mode:
- shake the contents of the bottle thoroughly;
- open the bottle and pour the additive into the fuel tank (use the fuel funnel if necessary);
- fill up the tank with fuel.
- When the car has run more than 50,000 kilometres during the first two refuelling it is recommended to fill 2 bottles of SDA 50 ml per 40-60 litres of fuel (or at the rate of 2 ml per 1 litre of fuel).
