Atomium HPFP | High Pressure Fuel Pump

Designed for application on High-pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines.

FEATURES

Lubricant Composition Atomium  HPFP is designed for the treatment of High-pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines.

The treatment to be made in 2 stages.

For the treatment use calculation in running hours (moto-hours): for generators and other stationary equipment 1 running hour = 50 km of run, for wheel tractors (and equipment) 1 running hour = 10 km of run, for a caterpillar special equipment 1 running hour = 5 km of run.

Precautions: Not harmful if applied correctly.

First aid:

• In case of contact with skin remove the material wash out with warm water, and then wash again with soap.
• In case of contact with eyes wash out eyes with a large amount of water.
• In case of swallowing consult a doctor.

APPLICATION MODE

The 1st stage: Pour Lubricant Composition Atomium  HPFP in a full fuel tank (but no more than 50-55 liters of diesel fuel in a tank) at the rate of 1 ml of the lubricant on 1 L of diesel fuel. Drive till complete fuel depletion in the fuel reservoir (before the indicator shows the minimum fuel rest). Make refueling without adding Atomium  HPFP, then run 2000-3000 km till the 2nd stage.

The 2nd stage: Pour Atomium  HPFP in a full fuel tank (but no more than 50-55 liters of diesel fuel in a tank) at the rate of 1 ml of Suprotec on 1 L of diesel fuel. Drive till complete fuel depletion in the fuel reservoir (before the indicator shows the minimum fuel rest). Then make regular refueling.

Important notes:

• Before applying Atomium  HPFP shake the can thoroughly until natural sediments (active components) are totally dissolved.
• After applying Atomium  HPFP drive the vehicle for no less than 20 minutes in any mode (regular operation).
• It is recommended to carry out Atomium treatment of the fuel systems together with engine processing at the same time or sequentially.
• It is not recommended to apply the lubricant at the existence of mechanical breakages of diesel injectors (the belts of injectors cannot be restored).
• Atomium  HPFP is compatible with any type of diesel fuel.
• To provide an optimal level of technical condition of the fuel system it is recommended to apply Atomium  HPFP every 30 000 - 40 000 km of run.

EFFECTS OF APPLICATION

• Restores working parameters (pressure) of high-pressure fuel pumps, Common rail systems, Pump injectors of diesel engines (as a result of optimization of spacings in conjugated friction parts);
• Significantly decreases noise and vibration levels in HPFP;
• Increases of a lifetime of the HPFP, Common rail systems, Pump injectors in 1.5 – 2 times (due to wear intensity decreasing);
• Increases engine effective power (as a result of fuel combustion quality improvement,);
• Decreases fuel consumption by 3-5 % (as a result of compression recovering and combustion quality improvement);
• Decreases exhaust CO/CH emissions up to 50 % (as a result of improvement of combustion quality)