ATOMIUM MAX HPFP | Commercial vehicle fuel system
Regular price £59.99 Save £-59.99Additive MAX 200 HPFP is designed to restore performance and extend the life of high pressure fuel pumps diesel engines trucks and special equipment:
- inline fuel pumps;
- fuel distribution pumps;
- mainline fuel pumps in COMMON RAIL systems;
- systems "PUMP-NOZZLE".
EFFECTS OF APPLICATION
Compound MAX HPFP restores worn parts and optimizes gaps in plunger pairs and in conjugated friction parts of pumps.
This allows to:
The pump provides pressure within the output operating characteristics, providing fuel spray quality;
Restoring optimal coupling of plunger pairs reduces vibration and in turn the noise of the pump;
Fuel supply regeneration leads to increased fuel combustion quality, which provides increased engine capacity.
Improving the quality of fuel combustion reduces its consumption by 3% -5%.
APPLICATION
Tribotechnical compound MAX HPFP is applied in two stages. At each stage of treatment you must add compound MAX HPFP in the fuel tank as follows:
Shake the can with compound MAX HPFP thoroughly until natural sediments (active components) are totally dissolved.
Add the compound in the fuel tank before the next refueling.
Fill the tank with about 200 liters of diesel fuel. (See dosage in the notes to the smaller volume tanks).
Immediately after applying it is recommended to drive the car for no less than 20 - 25 min in the regular operation mode.
After the procedure, you can use the car as usual.
After 2500 - 3000 km it is necessary to conduct the second step of the treatment and repeat the whole procedure with MAX HPFP.
Thoroughly stir the contents of the can with MAX HPFP
Add the compound in the fuel tank before the next refueling.
Fill the tank with about 200 liters of diesel fuel.
Drive the car for no less than 25 - 30 min. in the regular operation mode.
