ATOMIUM Aprohim Engine Flush 200 km | Any type of engine

Long-term flushing ATOMIUM APROHIM ENGINE FLUSH 200 km is designed to clean the internal surfaces of the engine from long-standing deposits, removes black sludge and other contaminants and deposits. Flushing belongs to the class of "soft" cleaners, which require a certain time of action. This is why flushing must be added to the oil system approximately 200 kilometres before the planned oil change. This mileage and, consequently, engine hours will be sufficient for effective, but at the same time gradual, safe cleaning. Engine flush - consistently dissolves contamination by the incoming flow of oil, does not allow the formation of lumps and clots suspended in the oil.

Effects of application

Washing composition ATOMIUM APROHIM ENGINE FLUSH 200 km - gently dissolves deposits and dirt in various components and mechanisms of the engine, formed during overheating and poor combustion of fuel, does not allow them to settle again in the oil channels, allows you to remove dirt when draining the oil. This allows you to:

• Facilitate engine operation,
• Effectively clean the oil system when switching from one type of oil to another,
• Extend the life of the new oil, which means better protection of the engine from wear,
• Restore the mobility and fit of compression and oil removal rings, which means to increase and equalize the compression in the cylinders, ensure uniform operation, high-quality fuel combustion,
• Restore the mobility of the hydraulic compensator plungers, which eliminates the characteristic knocking when starting the engine,
• Restore operation of the PCV valve.
  
  Recommended for continuous use before each oil change.
  
  Long-term flushing ATOMIUM APROHIM™ ENGINE FLUSH 200 km - does not affect rubber and composite parts, such as seals and gaskets.
  
  Investigated and tested for functional compliance with the technical parameters of Russian cars and oils.

Precautionary measures:

• Flushing agent according to the parameters of acute toxicity according to GOST 12.1007 belongs to the third hazard class (moderately dangerous substances). The product has a moderate irritating effect on the skin and mucous membranes of the eyes. Volatile components cause moderate irritation of the mucous membranes of the eyes and upper respiratory tract.
  
• Use only for the intended purpose.
• Do not disassemble or give to children.
• Avoid contact with the eyes and inside of the human body.
• Work in a well-ventilated area. Use personal protective equipment for the skin.
• If skin contact occurs, remove contaminated clothing. Wash the exposed area of the body surface with a stream of water, and then with soap and water. In case of contact with eyes, rinse with plenty of water. In case of contact with the digestive system, consult a doctor.

Notes:

• Store in a place protected from moisture and direct sunlight at a temperature from -20 ᵒC to +50 ᵒC.
• Compatible with all types of engine oils.
• It is safe for engines of any design, including turbocharged ones.
• Evaporates during operation. It does not affect the properties of the lubricating oil.
• Safe for rubber seals, oil seals, oil caps;
• It does not clog the channels of the oil system and is not deposited on the walls of the internal combustion engine elements.

Manual:

• Warm up the engine to operating temperature.
• Stir the contents of the jar, shaking it for 1-2 minutes.
• Pour 1 can of flushing into the oil filler neck. If the volume of the oil system is more than 6 litres, it is necessary to fill 2 cans of product.
• Make the trip by car within 20-25 minutes.
• Replace the oil and oil filter 200 kilometres after applying the product.

ATTENTION! IN THE EVENT OF SIGNIFICANT OIL CONTAMINATION DURING CLEANING OR A SHARP DROP IN OIL PRESSURE (OIL PRESSURE LAMP FLASHING), IMMEDIATELY REPLACE THE OIL AND OIL FILTER.

Output:

• Long-term flushing of the engine;
• TU 2384-006-79761558-2014;
• Storage conditions from -20 ᵒC to +50 ᵒC;
• Shelf life 5 year;
• The date of manufacture is indicated on the label.