Fuel additive ATOMIUM APROHIM SGA gently cleans fuel systems, lubricates them, protects against corrosion and prevents the formation of deposits. This restores the performance of fuel pumps, injectors or injectors, protects them from wear and extends their service life. A comprehensive restoration of the fuel equipment improves injection, leads to a decrease in fuel consumption and an increase in dynamics.
Effects of Application
Pollution from inferior fuel is the main cause of performance degradation and fuel system failure. Fuel additive SGA imparts cleaning and lubricating properties to gasoline fuel, blocks corrosion of system elements due to the ingress of water or condensate.
Cleaning the pumps and reducing piston wear normalizes the fuel pressure in the system. Cleaning of valves, channels and jet nozzles - prolongs their service life. Together, this ensures quality fuel atomization and more complete combustion, resulting in the following effects:
- Reduction in fuel consumption by 5%-15% depending on the condition of the car.
- Extending the life of fuel systems.
- Reducing vibrations by evenly burning fuel in the cylinders.
- Reducing the load on the turbine, catalytic converters, fuel afterburners, thereby increasing their service life.
- Reduction of contaminants in engine oil, maintaining its performance characteristics and ultimately reducing engine wear.
The additive SGA is designed for long-term use, so it has a balanced "soft" formulation. It gradually removes dirt and deposits and prevents the formation of new ones. The additive does not contain "combustion promoters" or other substances that alter the way the engine operates.
The additive is sold in disposable bottles - in most cases one bottle for each filling of a full tank.
1 bottle 50 ml is designed for 40-60 litres of fuel (approximately 1 ml per 1 litre of fuel). Before refuelling the car, fill the additive in the fuel tank.
Appliction mode:
- shake the contents of the bottle thoroughly;
- open the bottle and pour the additive into the fuel tank (use the fuel funnel if necessary);
- fill the car with fuel.
- When the car has run more than 50,000 kilometres during the first two refuelling it is recommended to fill 2 bottles of product 50 ml per 40-60 litres of fuel (or at the rate of 2 ml per 1 litre of fuel).
